20 W
Max transmit power
768 kHz
Real-time band view
170 mA
Receive draw with screen on
140 WPM
Built-in CW keyer
Built for the field
Take the whole station with you.
Low power draw, a screen you can read in direct sun, and silent FET switching make the M4+ ideal for parks, summits and campgrounds.
- Standalone FT8, WSPR, RTTY, PSK and SSTV apps, no PC needed
- Scope keeps running during CW sending (full QSK)
- Plug in a USB headset, mic, speaker or keyboard
- Monthly firmware updates over Wi-Fi

Specifications
Full specifications
From the M4-Plus datasheet, release 1.1.
Frequency coverage
160–10 m ham bands; general-coverage receive 1.5 to 100+ MHz; optional 6 m (54 MHz)
Modes
SSB, CW with full QSK, AM, narrow-band FM, plus four digital sub-modes over USB/Wi-Fi
Transmit power
0–20 W, high-efficiency Class-E (Sokal) PA, up to 74% efficiency
Protection
SWR and over-current protected final stage (VSWR with head unit)
Display
5.0″ anti-glare XGA touchscreen, 1000 cd/m²
Processor
32-bit floating-point ARM Cortex-M7, 1,024 DMIPS
Spectrum bandwidth
Slip-Tune™ 6 kHz up to 768 kHz real-time
Sensitivity
−132 dBm MDS (160–10 m)
Visual noise floor
−138 dBm (1024-bin FFT, 27.1 dB processing gain)
Noise figure
About 3 to 6 dB
ADC
Dual 5.4 MS/s 16-bit ADCs, oversampled to a 24-bit data stream
CW keyer
5–140 WPM, full break-in, 24 message memories, USB keyboard sending
Audio
8-band TX and RX EQ, DSP speech processing, 5 W audio output
Connectivity
Wi-Fi 802.11b/g; dual USB with 48–192 kHz IQ and audio streaming
Current drain
38–185 mA (standby/receive, indoor brightness)
Size
131.5 × 85.0 × 27.0 mm (5.18 × 3.35 × 1.06 in)
Weight
Transceiver 391 g (13.8 oz); head unit only 298 g (10.5 oz)
Warranty
1-year back-to-base
In action
Watch the M4+ on the air
QCom Ultra transceiver: standalone mode
M4+ transceiver: Polar SSB transmission quality
QSK full break-in CW: the scope keeps running
Common questions
Before you buy
Do I need a computer to use it?
No. The M4+ works completely on its own, including digital modes like FT8 and WSPR. You can connect a PC or tablet over USB if you want to.
Can I use it with my existing radio?
Yes. It doubles as a pan-adapter for most radios with an IF or IQ output. See the compatible radios list on the How It Works page.
How do I order?
Choose your region in our store and add the M4 bundle, then the TX PA EXT transmitter upgrade and band filters. Units ship by express courier.
What support do I get?
Members get personal technical support by email, phone and WhatsApp, a 1-year back-to-base warranty, and upgrade boards at cost.
Questions before you order?
Tell us which radio you own and what you want to do with it. A real member of the team will reply with honest advice, delivery times and the right bundle for you.

